January 23, 2019 by admin admin

Carlon® non-metallic expansion/deflection coupling

from ABB Installation Products (formerly Thomas N Betts)

Carlon® Non-Metallic Expansion/Deflection Coupling

Use the Carlon non-metallic expansion/deflection coupling to join two rigid PVC conduit runs in applications requiring movement in any direction at structural joints.

Improves safety & Saves labor time!

Now Compatible with Fiberglass Raceways!

DOWNLOAD A GUIDE TO BONDING FIBERGLASS CONDUIT

EXPANSION/ DEFLECTION COUPLING WHITE PAPER

VIEW PRODUCT CUT SHEET

Until now, the only available solutions in the market were either using metallic expansion/deflection couplings, which are very expensive for a PVC system, or an improvised, unsafe and labor-intensive solution involving Liquidtight flexible conduit, ENT connectors and PVC adaptors, which is neither UL approved nor NEC compliant.
In contrast, T&B’s new solution is UL approved, fully NEC 2014 compliant, safe, quick and easy to install, saving labor costs and minimizing the number of SKU parts needed.
Sizes range for ½”-4”, which suit any industrial segment, such as infrastructure (bridges, walkways), marine piers, parking garages, schools, hospitals, commercial buildings, water and waste water facilities, and many others.
In adding this new product to our existing XD series Rigid Metallic Expansion/Deflection Couplings and Carlon^® E945 series Expansion Couplings product lines, we now offer complete solutions to most end users, distributors and contractors.
Five times faster to install vs. the traditional method
Up to 5-to-1 SKU reduction
Suitable for use indoors, outdoors, direct buried or embedded in concrete in a variety of applications, including bridges, piers, parking garages, overhead walkways, hospitals and other buildings
UL Certified and NEC Code compliant
Inner sleeve provides a constant, smooth inner diameter in any position to ease wire pulling and prevent wire insulation damage
MADE IN THE USA
Review Product Sheet, Part numbers and available sizes of the Carlon non-metallic expansion/deflection coupling

This coupling provides a flexible connection, safely accommodating axial or parallel deflection of up to 3⁄4″ and angular deflection of up to 30° from relaxed position.

It meets the requirements of 2014 National Electrical Code (NEC) Article 300.4(H) for use where a raceway crosses a structural joint intended for expansion, contraction or deflection in buildings, bridges, parking garages and similar structures.

The Carlon expansion/deflection coupling is suitable for use indoors, outdoors, direct burial or embedded in concrete in bridges, piers, parking garages, overhead walkways,hospitals and other buildings.

DOWNLOADABLE GUIDE TO BONDING FIBERGLASS CONDUIT

Listings/compliances
• cULus listed
• CSA certified to CSA C22.2 No. 85
• 2014 NEC Article 300.4(H) compliant

VIEW JD MARTIN LINE SHEETS

December 12, 2018 by admin admin

Dual-function Current Interrupter (DFCI) Breakers NEW in ABB SENTRICITY® Portfolio

NEW FOR ABB SENTRICITY

Introducing dual-function current interrupter (DFCI) breakers to

SENTRICITY® portfolio

THQL 1115DF and THQL 1120DF

The UL 67, UL 489, UL 943 and UL 1699 listed GE THQL dual-function (both AFCI and GFCI) circuit interrupter is UL certified for use in SENTRICITY load centers.

The GE dual-function circuit interrupter is series rated for use with SENTRICITY main breaker load centers.
The dual-function circuit interrupter (DFCI) breaker combines arc fault (AFCI) and ground fault (GFCI) protection into a single device.

This provides cost savings and simplifies installation and maintenance.

ABB DUAL FUNCTION CIRCUIT BREAKER BROCHURE

ABB SENTRICITY CATALOG

Specifications:

15 A or 20 A
Plug-in style
10 kAIC or 22 kAIC
120V AC, 60 Hz
Wire Range #14 AGW to #8 AWG

Call JD Martin Inside Sales for Price & Availability 1-800-444-2306 or find your Inside Sales Contact HERE

November 9, 2018 by admin admin

DIALIGHT VIGILANT- 72,000 LUMEN HIGH OUTPUT FIXTURE

NEW FROM DIALIGHT

DIALIGHT VIGILANT^®

72,000 LUMEN- LED HIGH OUTPUT HIGH BAY FIXTURE

Features

Dialight’s High Output High Bay delivers superior energy efficiency and long-life performance compared to conventional HIDs, providing up to 72,000 lumens to meet the needs of large-scale facilities and high-mounting applications.

Featuring a purpose-built power supply, every Dialight High Output High Bay offers dependability you can count on with the flexibility to meet a wide range of needs.

Product Overview

Dialight’s new High Output High Bay fixture expands upon the existing 45,000 and 60,000-lumen products to include a 72,000 lumen option with 19 percent greater lumen efficiency, now up to 149 lm/w.

Providing highly-efficient lighting for lofty warehouses, shipyards, power plants, steel mills, dry docks, aircraft hangars, manufacturing and other heavy industrial applications with extremely high mounting height requirements.

Also available with a new up-light diffuser accessory that projects 7% of light output upward onto the ceiling. An industry leading 10-year warranty covering the entire fixture comes standard.

Dialight’s precision optics direct the light where it’s needed—in the work plane—without wasting light on the walls or ceilings.

Available Options & Specifications

The new High Output LED fixture is designed to be utilized globally, with UL-1598/A, CE, RCM and ENEC listings.

Occupancy Sensor Option
Rated for 40′ Mounting Height
10 year warranty
Higher efficiency – up to 149lm/W
45,000 – 60,000 – 72,000 lumens
IP 66 / 67
120 – 277 VAC, 347 VAC, 480 VAC
Low Profile Option
Low Profile 11.2″ Fixture Height
10 year warranty
Higher efficiency – up to 149lm/W
45,000 – 60,000 – 72,000 lumens
IP 66 / 67
120 – 277 VAC, 347 VAC, 480 VAC

Accessories –

Up-light Diffuser- H6XDIFFUSER

Glare reduction and 7% up-light

The new High Output LED fixture is also available with a new up-light diffuser accessory that projects 7% of light output upward onto the ceiling where desired.

WITHOUT DIFFUSER

WITH DIFFUSER

*Expect about 16% reduction in light output

DIALIGHT VIGILANT- 72,000 LUMEN HIGH OUTPUT FIXTURE

THE DIALIGHT ADVANTAGE

10 year warranty
Significantly reduced maintenance cost = Less downtime
Long lumen maintenance = Improved safety
Ingress protection against moisture, dust = Improved fixture reliability
2 for 1 replacement of aging metal halide systems = Rapid ROI
Dimming and instant on occupancy sensor = Significantly reduces energy costs
- IP 66 rated PIR occupancy sensor, dimming to 5% vs 14% Holophane,
Remote power supply for vestal mounting = Betting lighting in more applications
- Remote power mounting distance of up to 200’ vs 150’ Holophane

Questions?

Please contact our JD Martin Dialight Inside Sales Specialist

Autumn Huffman @ 1-800-444-2306 Ext 5664

for Price & Availability!

Or Email Her Directly Here

More Information & Downloads

REVIEW CASE STUDIES

DOWNLOAD PDF CATALOG

October 30, 2018 by admin admin

Smart® Tool + Intelligent, dieless crimping and reporting tool

Smart® Tool +

ABB’s Smart Dieless Crimping and Reporting Tool NEW FROM ABB!

Smart® Tool+ helps deliver a perfect crimp every time by automatically measuring the inserted connector and applying the ideal compression depth and force, giving you the precision of a die without the complications. An in-tool indicator confirms a secure crimp, and that data is stored and uploaded to a cloud database via Bluetooth technology.


Use RFID-enabled Color-Keyed connectors for maximum efficiency.	Transfer confirmation data from tool to mobile device via custom app.	Upload records to your online database from the mobile app.

**Eliminate dies. Eliminate mistakes*. Eliminate doubt.**

Once Smart Tool+ reads the RFID tag, it knows
the material and size of the lug – so there’s no
need to switch dies and make size adjustments.
With a crimp range of 3/0 AWG through 750
copper and 1/0 through 600 kcmil aluminum
lugs and splices, you’ll have one tool to fit most
lugs and cables you encounter.

DOWNLOAD A PDF BROCHURE

Product Video

Features and Benefits:

Intelligent Dieless Crimping System
Lightweight balanced inline design
UL 486 compliant with a single crimp
3/0 – 750 CU and 1/0 to 600 AL range
Backward compatible for standard lugs
Catalog Part Number: BTRF-37C16A

Applications:

Critical Power
Data Centers
OEM Switch Gear and Power Critical Equipment
Critical Asset installations

Contact your INSIDE Sales Support for Pricing!

October 29, 2018 by admin admin

SCH 40 & SCH 80 PVC Conduit & Fittings In STOCK NOW @ JDM Houston

Heritage Plastics offers a complete line of rigid PVC conduit and fittings! And we stock their Schedule 40 Schedule 80 PVC Conduit & fittings right in our Houston Pipe & Wire Warehouse!

For your commercial, industrial and utility usage, Heritage PVC conduit is proven durable and effective for years of maintenance-free performance in underground, encased and exposed applications in accordance with the National Electrical Code.

BENEFITS OF HERITAGE SCHEDULE 40/ SCHEDULE 80 PVC CONDUIT

Corrosion Resistance
Resistant to most chemicals, PVC is typically not affected by corrosive soils or salts.

Non-Magnetic and Non-Galvanic
Properties of Heritage PVC Conduit provide good insulation and no power loss or conductor heating.

Self-Extinguishing
Properties make PVC fire resistant.

Impact Resistant
Tough, durable, with high tensile strength, yet easy to handle and install right on the jobsite.

IN STOCK TODAY IN HOUSTON @ JD MARTIN PIPE & WIRE WAREHOUSE

Call your Inside Sales Contact for Pricing & to Place and Order!

OTHER Heritage Material ships from their Weatherford, Texas warehouse

CLICK HERE for a Downloadable Flyer of EVERYTHING JD MARTIN STOCKS IN HOUSTON

Product Types

Schedule 40 & 80 rigid PVC conduit systems are sunlight resistant and are used exposed, encased in concrete, concealed in walls and in direct burial applications including systems for:

Utilities
Cable, data and communication lines
Institutional, commercial, industrial buildings
Residential applications, & service entrances
Street and highway underground feeds
Transportation systems – subways, bridges, tunnels, airports
Water and wastewater treatment plants
Marinas
Mines and mills

Type DB-60 and DB-120 utility duct are designed for direct burial applications. Type EB-20 and EB-35 are designed for burial encased in concrete.

Codes and Standards Compliance

Our Heritage Plastics Schedule 40 and Schedule 80 rigid conduits are third-party certified to UL 651 and are allowed for use with 90º C conductors, in accordance with the National Electrical Code. They are manufactured in accordance with NEMA TC2.

Heritage Plastics Type DB and EB ducts are manufactured in accordance with NEMA TC 6&8 and are allowed for use with 90º C conductors.

Heritage Plastics PVC fittings are manufactured in accordance with NEMA TC3. The UL standard for PVC fittings is UL 651; for boxes UL 514C, for cover plates UL 514D and for enclosures UL 50.

See product pages for UL listing information.

Specification

All wiring should be installed in Our Heritage Plastics rigid PVC conduit and secured by means of proper fittings. We recommend that you pair them with Heritage Plastic fittings for added security. The JDM Pipe & Wire Warehouse in Houston stocks PVC Elbows & Couplings as well to suit your needs! Heritage also offers a complete line of outlets, pull boxes and junction boxes as well.

Exposed conduit shall be securely attached and supported by pipe straps. The pipe straps shall be installed at the recommended spacing as specified in the National Electrical Code (NEC). The pipe straps must allow for linear expansion and contraction of the conduit due to temperature change. If the variance in temperature exceeds 25°F, expansion joints shall be installed according to the manufacturer’s recommendations.

If rigid PVC conduit is embedded in concrete or direct buried, support straps are not required.

Schedule-40 PVC Rigid Conduit Rated for 90° C Wiring

Our Heritage Plastics Schedule 40 PVC Conduit is sunlight resistant. It meets or exceeds the requirements of NEMA TC-2 and UL-651 for Schedule 40 Conduit*.

Schedule 40 (10 ft Crate Quantities)

Trade Size	Part No.	Avg OD (in)	Minimum Avg ID (in)	Min Wall (in)	Weight/Ft (lbs)	10 ft Crate Quantity (ft)
1/2	8102	0.84	0.578	0.109	0.165	6000
3/4	8103	1.05	0.78	0.113	0.22	4400
1	8104	1.315	1.004	0.133	0.326	3600
1-1/4	8105	1.66	1.335	0.14	0.441	3300
1-1/2	8106	1.9	1.564	0.145	0.528	2250
2	8108	2.375	2.021	0.154	0.73	1400
2-1/2	8110	2.875	2.414	0.203	1.158	930
3	8112	3.5	3.008	0.216	1.609	880
3-1/2	8114	4	3.486	0.226	1.935	630
4	8116	4.5	3.961	0.237	2.292	570
5	8120	5.563	4.975	0.258	3.105	380
6	8124	6.625	5.986	0.28	4.03	260
8*	880747	8.625	7.853	0.322	6.065	140

Schedule 40 (20 ft Crate Quantities)

Trade Size	Part No.	Avg OD (in)	Minimum Avg ID (in)	Min Wall (in)	Weight/Ft (lbs)	20 ft Crate Quantity (ft)
1/2	8502	0.84	0.578	0.109	0.165	12000
3/4	8503	1.05	0.78	0.113	0.22	8800
1	8504	1.315	1.004	0.133	0.326	7200
1-1/4	8505	1.66	1.335	0.14	0.441	6600
1-1/2	8506	1.9	1.564	0.145	0.528	4500
2	8508	2.375	2.021	0.154	0.73	2800
2-1/2	8510	2.875	2.414	0.203	1.158	1860
3	8512	3.5	3.008	0.216	1.609	1760
3-1/2	8514	4	3.486	0.226	1.935	1260
4	8516	4.5	3.961	0.237	2.292	1140
5	8520	5.563	4.975	0.258	3.105	760
6	8524	6.625	5.986	0.28	4.03	520
8*	924297	8.625	7.853	0.322	6.065	280

*UL 651 does not include 8″

Extra Heavy Wall Schedule-80 PVC Rigid Conduit Rated for 90° C Wiring

Our Heritage Plastics Schedule 80 is sunlight resistant, it meets or exceeds the requirements of NEMA TC-2 and UL-651 for Schedule 80 Conduit.

Schedule 80 (10 ft Crate Quantities)

Trade Size	Part No.	Avg OD (in)	Minimum Avg ID (in)	Min Wall (in)	Weight/Ft (lbs)	10 ft Crate Quantity (ft)
1?2	9302	0.84	0.502	0.147	0.205	6000
3?4	9303	1.05	0.698	0.154	0.278	4400
1	9304	1.315	0.91	0.179	0.41	3600
1-1?4	9305	1.66	1.227	0.191	0.565	3300
1-1?2	9306	1.9	1.446	0.2	0.726	2250
2	9308	2.375	1.881	0.218	1.004	1400
2-1?2	9310	2.875	2.25	0.276	1.531	930
3	9312	3.5	2.82	0.3	2.049	880
3-1?2	924024	4	3.28	0.318	2.499	630
4	9316	4.5	3.737	0.377	3.122	570
5	9320	5.563	4.713	0.375	4.33	380
6	9324	6.625	5.646	0.432	5.954	260

Schedule 80 (20 ft Crate Quantities)

Trade Size	Part No.	Avg OD (in)	Minimum Avg ID (in)	Min Wall (in)	Weight/Ft (lbs)	20 ft Crate Quantity (ft)
1/2	925785	0.84	0.502	0.147	0.205	12000
3/4	9503	1.05	0.698	0.154	0.278	8800
1	9504	1.315	0.91	0.179	0.41	7200
1-1/4	924298	1.66	1.227	0.191	0.565	6600
1-1/2	9506	1.9	1.446	0.2	0.726	4500
2	9508	2.375	1.881	0.218	1.004	2800
2-1/2	924299	2.875	2.25	0.276	1.531	1860
3	9512	3.5	2.82	0.3	2.049	1760
3-1/2	–	4	3.28	0.318	2.499	1260
4	9516	4.5	3.737	0.377	3.122	1140
5	9520	5.563	4.713	0.375	4.33	760
6	9524	6.625	5.646	0.432	5.954	520

strut-aluminum-channel-cable-channel-tray-houston

October 24, 2018 by admin admin

Cable Tray Stocked In Houston!

Metallic – Aluminum ® Cable Tray

Stock in Houston at the JD Martin Warehouse 309 McCarty Rd Houston, TX 77029

Call 1-800-444-2306 for more information or to place your order!

Download our Houston Cable Tray Flyer

Why ABB/ T&B Cable Tray?

Reliable: Cable tray systems open design eliminates moisture buildup and reduces damage to cable insulation during installation.

Adaptable: As new technologies develop or new needs arise, count on full adaptablity from a cable tray system because cables can enter or exit at any point.

Maintain with Ease: Because cable tray systems are easy to inspect, maintenance requires less time, and there is less susceptibility to fire loss.

T&B Cable Tray Features

• Straight side rail design: Extruded I-beam
Nominal height 4 in. to 8 in.
Loading height 3 in. to 7 in.
• Snap-in splice plate connection
• Reverse position of every other rung for bottom or top mounting of cable ties
• Versatile continuous open slot rungs (strut profile)
• Holes spaced 1 in. designed based on the exclusive Ty-Rap® cable tie slots (5/8 x 5/8)
• Extra wide rung
• Four bolt connection
• Choice of two styles of fitting (U & H) side rails

APPLICATIONS

Commercial	Industrial
Schools	Petrochemical Plants
Hospitals	Automotive Plants
Office Buildings	Paper Plants
Airports	Food Processing
Casinos	Power Plants
Stadiums	Refineries
	Manufacturing
	Mining

How to Create Part Numbers

Thomas & Betts has created a numbering system based on the order of selection criteria. For example the first selection issue is the environment which the cable tray will be subjected to. This selection will lead to the best material for your application. For complete details on cable tray selection process, see page A8 in the technical section.

Methods

Select the material best suited to your CABLE TRAY APPLICATION
Determine the tray series using the NEMA/CSA Load/Span Designations (page A16 in the Thomas N Betts Cable Tray catalog)
Select nominal depth and width of tray based on Cable See «Sizing Cable Tray» page A23.
Select the bottom type based on cables and spacing
The last number is the length of the cable tray in meters or

Straight Section Number Selection

( A H 1 – 6 ) 24 – L09 -144
Material Prefix	Style Prefix	Series	Side Rail Height (in.)	Width	Bottom Type	Length
A • Aluminum	H • H-Beam	1 • Series 1 ** 3 • Series 3 5 • Series 5	4	06 • (6 in.) ** 09 • (9 in.) 12 • (12 in.) 18 • (18 in.) 24 • (24 in.) 30 • (30 in.) 36 • (36 in.) 42 • (42 in.)	L06 (6 in. rung spacing) L09 (9 in. rung spacing) L12 (12 in. rung spacing) V (ventilated) * S (solid trough) *	144 (12 ft.) 288 (24 ft.) 3 (3 meters) 6 (6 meters) 360 (30 ft.) †
		2 • Series 2 4 • Series 4	5
		1 • Series 1 3 • Series 3 4 • Series 4 5 • Series 5 6 • Series 6 7 • Series 7	6
		3 • Series 3 4 • Series 4	7
		1 • Series 1**	8

CABLE TRAY STOCKED IN HOUSTON

All HOUSTON Stocked Cable Tray is H-Beam Style, Aluminum, with 9” ladder Rung Spacing.
Other options ARE available, but ship from Montreal, Canada

NEMA CONFIGURATIONS: NEMA 12C & NEMA 20C

SIDE RAIL OPTIONS: 4″ OR 6″

AVAILABLE WIDTHS: 12, 18, 24, & 36 INCHES

NEED HELP INTEGRATING T&B CABLE TRAY INTO YOUR DESIGN?

T&B Cable Tray Systems Design Tools

It’s now easier than ever to integrate T&B Cable Tray product content into your designs.

Access a range of file formats and content for specific software solutions here.

October 18, 2018 by admin admin

Introducing the NEW Polymer Concrete 48″x60″x48″

NEW From Quazite! Polymer Concrete 48″x 60″x 48″ Underground Enclosure

Hubbell’s Quazite enclosures set the standard for all manufacturers. High strength designs, highest grade raw materials, and excellent workmanship make us the industry leader when it comes to polymer concrete enclosures.

OVERVIEW

Quazite polymer concrete PG style enclosures are made from select-grade aggregates in combination with a polymer resin system.

When combined through a process of mixing, molding, and curing, a strong cross-linked bond is formed.

Precast polymer concrete is reinforced with fiberglass to give it additional strength and rigidity.

FEATURES

• Polymer concrete 48” x 60” x 48” box and a 3-piece split cover
• Engineered and tested to achieve ANSI/SCTE tier 22 certified requirements
• Contains the EZ® Auger fastener technology, providing trouble-free installation
• Custom logos and colors available

AVAILABLE OPTIONS

– Swing arms
– Cable racks
– Bonding and grounding

Download Spec Sheet HERE

Download Flyer HERE

October 3, 2018 by admin admin

Thomas & Betts Corporation is now ABB Installation Products!

Just Released from Thomas N Betts/ ABB!

10/01/2018 | 06:01pm CEST

CARY, N.C., Oct. 1, 2018 /PRNewswire/ —

ABB announced that, effective today, the Thomas & Betts Corporation will begin doing business as ABB Installation Products, Inc. Thomas & Betts designs and manufactures products used to manage the connection, distribution, and transmission of electrical power in industrial, construction, and utility applications globally.
ABB Installation Products will continue to design, manufacture and market the trusted Thomas & Betts electrical product brand names such as Steel City®, Iberville®, Star Teck®, Color-Keyed® and Ty-Rap®. Customers will continue to receive the same great products, quality service and ease of business that has continued over the past six years of ABB’s ownership of Thomas & Betts.

“Aligning Thomas & Betts under the ABB brand – while keeping the products and product names that customers know and trust – helps us become a leaner, more market-focused company that delivers higher customer value and shareholder returns,” said Greg Scheu, President of ABB Americas Region. “Together with Thomas & Betts, ABB offers a combined 250 years of innovation and expertise of keeping the world’s electricity flowing from source to socket.”
“A unified ABB retains the best of Thomas & Betts – its authentic and trusted products, valued employees, and its commitment to local manufacturing in the communities we proudly serve,” Doug Schuster, Executive Vice President and Global Managing Director of ABB’s new Installation Products Business Unit, said. “Our U.S. customers will get the best of both worlds as ABB and Thomas & Betts share similar DNA in our legacy of innovation, our passion for excellence, and our commitment to revolutionizing efficiency through technology.”
A member of the ABB group since 2012, Thomas & Betts is one of 20 ABB-owned brands being migrated to the ABB global brand this year as part of ABB’s Next Level strategy.
ABB (NYSE: ABB) is a pioneering technology leader in power grids, electrification products, industrial automation and robotics and motion, serving customers in utilities, industry and transport & infrastructure globally. Continuing a history of innovation spanning more than 130 years, ABB today is writing the future of industrial digitalization with two clear value propositions: bringing electricity from any power plant to any plug and automating industries from natural resources to finished products. As title partner in ABB Formula E, the fully electric international FIA motorsport class, ABB is pushing the boundaries of e-mobility to contribute to a sustainable future. ABB operates in more than 100 countries with about 147,000 employees. www.abb.com
About ABB in the United States:

ABB’s U.S. and Americas business is headquartered in Cary, North Carolina. Since 2010, ABB has invested $14 billion in the United States, and the company continues to expand and localize its offerings for customers. ABB operates around 65 manufacturing facilities and employs more than 24,000 people across the U.S.

Read the full Article from ABB

Download a JD Martin Line Sheet

August 15, 2018 by admin admin

DOWNLOAD OUR LINE SHEETS

Click your area below to download our most recent line sheet!

HOUSTON/BEAUMONT LINE SHEET

NORTH TEXAS LINE SHEET

SOUTH TEXAS LINE SHEET

EAST TEXAS LINE SHEET

WEST TEXAS LINE SHEET

OKLAHOMA LINE SHEET

August 3, 2018 by admin admin

MERSEN COVERAGE IN TEXAS

MERSEN ELECTRICAL POWER PRODUCTS NOW COVERED BY JD MARTIN IN ALL TEXAS TERRITORIES!

FOR IMMEDIATE RELEASE

EFFECTIVE AUGUST 1, 2018

“We are eager to extend our Mersen coverage across Texas! Mersen’s innovative solutions & comprehensive offering of Fuses, Surge Protection Devices & Controls, along with one-of-a kind end user & distributor support tools; have no doubt made Mersen the preferred partner for the global power electronics market. J.D. Martin is proud to support such a dynamic brand & global expert in electrical protection and control,” says Greg Baker, President of J.D. Martin. “With Texas offices in Houston, Dallas, San Antonio, Wichita Falls, Denton, J.D. Martin is well-positioned to continue growing and supporting the Mersen brand, by working with the distribution channel, engineering and end user customer base.”

Contact J.D. Martin Company, their main office number is (800) 444-2306. www.jdmartin.com

LEARN ABOUT MERSEN POWER PRODUCTS << CLICK HERE >>

Mersen is a recognized global expert in electrical power and advanced materials. Mersen designs innovative solutions to address its clients’ specific needs to enable them to optimize their manufacturing process in sectors such as energy, transportation, electronics, chemical, pharmaceutical and process industries. Mersen Electrical Power provides a comprehensive line of current-limiting fuses (low voltage, general purpose, medium voltage, semiconductor, miniature and glass, and special purpose) and accessories, fuse blocks and holders, power distribution blocks, low voltage disconnect switches, surge protective devices, high power switches, heatsinks, laminated bus bars, and more.

SEE BELOW FOR FLYER! YOU CAN DOWNLOAD A PRINTABLE COPY << CLICK HERE >>

JD MARTIN TO REP MERSEN ELECTRICAL POWER PRODUCTS IN ALL TEXAS TERRITORIES

JDM Warehouses

Territory

Leading Representative